QuickBooks

QuickBooks Desktop

QuickBooks Desktop – Getting Started

 

This document covers how to setup the Sync process between ThermoGRID and QuickBooks Desktop. You will be following other documents depending on the sync method you choose and how you want to configure it.

Supported versions for the Sync from ThermoGRID to QuickBooks Desktop are:

• QuickBooks Enterprise Solutions
• QuickBooks Premier (2002 or later)
• QuickBooks Pro (2002 or later)
• QuickBooks Simple Start (2006 or later)
• QuickBooks Point of Sale (v.4.0 or later)

Any questions regarding this process should be sent to [email protected].

Steps:

1. by installing the Intuit QuickBooks Desktop Web Connector. Follow the “Install Intuit Web Connector” link to download the file (tg_qbd_install_webconnector.docx).

2. connect your ThermoGRID company account to QuickBooks Desktop. Follow the “Link ThermOGRID to QuickBooks Desktop” link to download the fie (tg_qbd_link_apps.docx).

3. on which sync method you choose, your next document will be different. These documents will go over setting up the sync method and explain how to get data to sync.

 

Chart of Accounts – Items

Orders are synced using Service Catalog Items from ThermoGRID that are added to the Products and Services area in QuickBooks and link to specific Accounts from the Chart of Accounts. Use this method if you would like to keep track of individual items, do reporting on them, etc. If you would to use this method, follow the “Sync Method – Chart of Accounts – Items” link to download the file (tg_qbd_sync_method_coa_items.docx).

 

Chart of Accounts – References

•  

Orders are synced using direct references in the Products and Services area in QuickBooks that match specific Accounts/Sub-Accounts from the Chart of Accounts. Use this method if you would rather limit the entries to the Products and Services area and don’t need to keep track of or report on individual items. If you would to use this method, follow the “Sync Method – Chart of Accounts – References” link to download the file (tg_qbd_sync_method_coa_references.docx).

 

Export & Transfer Clients QBD

Open QuickBooks: Click Reports, Lists, and Customer Contact List.

This brings up a list of your customers however it may not have all the info that you would want. To get more info and change the details… Click Customize Report.

This will bring up a window to allow you to select additional fields for the report. Main info clients typically want would be: First Name Last Name, Email, Billing Address, Shipping Address, Notes, Phone #s.

Once you have selected all the options you would like review, click “Excel” and “Create New Worksheet”

Look over this export thoroughly as you only get one import in to TG. Make sure it has all that you want and you can even compare to clients in the system to make sure the items you checked off for the report is giving you the correct info.

 

 

Download document with pictures - QB Client Export HERE

Install Web Connector QBD

QuickBooks Desktop – Install Web Connector

 

This document covers the download and installation of the QuickBooks Web Connector. You will go to the Intuit website, download and extract the compressed file, and then run the installation wizard. Configuration with ThermoGRID is done in a later document. Make sure you are referencing the Getting Started guide to know what documents you need to follow.

Any questions regarding this process should be sent to [email protected].

Steps:

• 1. If you currently have QuickBooks open and/or running, close it now.
  2. Go to the Intuit site by following this link:

https://developer.intuit.com/docs/0200_quickbooks_desktop/0100_essentials/quickbooks_web_connector

 

3. Click on the “Download, unzip and install the QuickBooks Web Connector” link.
4. Download the zip file to an easily accessible location like your desktop.
5. Open the zip file and double click on QBWebConnectorInstaller.exe.
6. If you get a pop up asking if you would like to extract files, click the “Extract all” button.
7. Extract the files in an easily accessible location like your desktop.
8. Open the folder you just extracted. Then right click on the QBWebConnectorInstaller.exe and choose the “Run as administrator” option. If you get a pop up that asks if you want to allow the app to make changes on your computer, click “Yes”.
9. Click “Next” on the first part of the install wizard.
10. Select “I accept the terms in the license agreement” and click “Next”.
11. Click the final “Install” button to begin the installation.
12. Wait for the install to complete. You can follow the progress bar to monitor the progress.
13. Click “Finish” to close the installation wizard.
14. You are now finished with the installation of the Web Connector.

Download Document with Pictures Install Intuit Web Connector

Connect Web Connector to ThermoGRID QBD

QuickBooks Desktop – Connect ThermoGRID to QBD

 

This document covers setting up the link from ThermoGRID to QuickBooks Desktop. You will be enabling QBD, saving a sync password, and adding ThermoGRID to your Web Connector using a custom configuration file. Make sure you are referencing the Getting Started guide to know what documents you need to follow.

Any questions regarding this process should be sent to [email protected].

Steps:

• 1. Sign into ThermoGRID using your administrator account. Then click on the Administration tab.
  2. Click on the “Company Settings” button to go to the company settings page.
  3. Click the “Edit” button so you can modify the settings.
  4. Scroll down until you see the “Quickbooks Desktop” section. Then check the “Enabled” checkbox.
  5. After it loads, the system should enable QuickBooks Desktop and provide you with a “Configuration File” link and a “Password”. Take note that the password will only be shown to you once so you’ll need to copy it for later where you will enter it into Quickbooks. The password will get saved so you won’t need it again after that. Highlight the password, right click, then select “Copy”.
  6. Then open up notepad or similar program like Microsoft Word, then paste the password.
  7. Then click on the “Download File” link to download the customized configuration file.
  8. Download the file in an easily accessible location like your desktop.
  9. Open Quickbooks Desktop and click on “File” in the header bar, then choose the “Update Web Services” option. This will open up the QuickBooks Web Connector.
  10. Click on “File” in the header bar, then choose the “Add an Application” option.
  11. Select the configuration file you downloaded then click the “Open” button. After this, you will get an Authorize New Web Service pop up window.
  12. Click “OK” on the Authorize New Web Service pop up. After this, you will get a Certificate pop up.
  13. Select the “Yes, whenever this QuickBooks company file is open” option, then click “Continue”.
  14. After you add the ThermoGRID application enter or copy and paste the password you saved earlier in the “Password”field. You should get a pop up asking if you want to save the password, select “Yes”.
  15. You are now finished linking ThermoGRID to QuickBooks Desktop.

Download Document With Pictures Connect ThermoGRID to QuickBooks Desktop

 

QuickBooks Errors QBD

Error Codes - QuickBooks Desktop (QBD)  

• 1.  

ERROR: Unable to add New Customer record to QBD - (3070) : The string "****** ****** (******)" in the field "****" is too long.

• 1. 1.  

This error occurs when you are trying to sync data that is too large for QBD.

• 1. 1.  

Check the error message for the specific field, then update the data in TG.

• 1. 1.  

Manually run or wait for the next sync and check again.

 

2. ERROR: Unable to Add Item to QBD - (3140) : There is an invalid reference to QuickBooks Account "" in the Item Non-Inventory.
   • 1.   This error occurs when you did not select an account when job costing the order.
     2.   Go back to the job costing page for this order, and select the account for each line item.
     3.   Manually run or wait for the next sync and check again.
     4.   To help eliminate the issue with this item from happening again, you can also edit the item in the service catalog and set the department field to the QBD account you need. This will set the default account on future orders and you won’t need to manually select the account on the job costing page.
   • 1.  

</ul>

</ul>

• • ERROR: Unable to Add Invoice to QBD - (3140) : There is an invalid reference to QuickBooks Item "TGS-*******" in the Invoice line.  QuickBooks error message: Invalid argument.  The specified record does not exist in the list.
    1. 1.   This error occurs when an item in QBD that was being referenced by TG gets deleted.
       2.   Because an item in TG can only be synced to QBD once, you will need to remove the item from the service catalog and re-add it.
       3.   Then go to the order, and remove the item that was causing the issue, and re-add it to the order using the newly added item from the service catalog.
       4.   TG will then insert a new item record into QBD and will start to keep track of that record’s ID.
       5.   Manually run or wait for the next sync and check again.

• 1. 1.  

</ol> </ol> </ul>

</ol> </ol> </ul> </ol> </ol>

• • ERROR: Unable to Add Invoice to QBD - (3240) : Object "********-**********" specified in the request cannot be found.
    1. 1. 1.   This error occurs when an object record in QBD gets deleted that is being referenced by the order. This may be from any action in QBD that destroys the record.
          2.   This error is most commonly caused by the customer record being deleted.
          3.   Open the client for this order in TG by using the order number above this error message.
          4.   While on the client page, expand the QuickBooks accordion at the bottom of the page and click the “Reset ID” button under the QBD section.
          5.   This will force TG to search QBD for a new customer record in QBD or insert a new one if none is found.
          6.   Manually run or wait for the next sync and check again.
          7.   If you continue to receive errors, contact ThermoGRID Support and we can help to narrow down what object in QBD was deleted.   General  Issues: Clients are being duplicated. This issue can happen when a client you already had setup in QB has a Display Name format that did not match up with TG. (“fname lname (id)”). TG Is unable to find the customer in QB when syncing an order so it creates a new record. To fix this duplicated client, first start by merging in the newly created customer account in QB to the old customer record. Go to this client’s edit page, expand the QuickBooks accordion at the bottom of the page, and click the “Reset ID” button under the correct QB section. This will force TG to search QB for the customer next time there is an order to sync. To make sure TG finds the correct customer this time, copy the customer’s Display Name field from QB and paste it intto the client’s Display Name field in TG. The next time an order is synced, TG should find the customer record in QB using the Display Name field that you entered and use that to sync the order.

5. + ERROR: Unable to add New Customer record to QBD - (3180) : There was an error when saving a Customers list, element "****** ****** (******)".  QuickBooks error message: This list has been modified by another user.
   • • 1. 1. 1.   This error is an internal locking mechanisim in QBD and often occurs when you are editing an object in QBD at the same time you are trying to sync data in TG.
             2.   Close out of any objects that you have open like customers, items, etc.
             3.   Manually run or wait for the next sync and check again.
             4.  
             5. 1.  
             6. 1.  
             7. 1.  
             8. 1.  
             9. 1.  
   • • 1. 1. 1. == Reconcile ThermoGRID to QBD ==
     • </div> </div> </div>
   </div> </div> 4. you would like to use the optional Class Tracking features of QuickBooks Desktop, follow the “Class Tracking” link to download the file (tg_qbd_class_tracking.docx). </div>

   QuickBooks Online

   Export & Transfer Clients QBO

   QuickBooks Errors QBO

   Error Codes - QuickBooks Online (QBO)  

   1.  

   ERROR: [2050] String length specified does not match the supported length. Min:*** Max:*** supported. Supplied length:*** (Field: *********).

   1. 1.  

   This error occurs when you are trying to sync data that is too large or small for QBO.

   1. 1.  

   Check the error message for the specific field, then update the data in TG to be under the max length and over the min length.

   1. 1.  

   Wait for the next sync and check again.

    

   2. ERROR: [6250] The customer you have specified has been deleted. You cannot create or edit a transaction with a deleted customer.
      1.   This error occurs when you have deleted a customer or you performed a similar action that removes/disables the customer record in QBO.
      2.   Open the client for this order in TG by using the order number above this error message.
      3.   While on the client page, expand the QuickBooks accordion at the bottom of the page and click the “Reset ID” button under the QBO section.
      4.   If there is no record in QBO for this customer and you would like TG to insert a new customer, you are done and can skip the remaining steps. If you would like TG to sync the order to another customer record that already exists in QBO, continue the following steps.
      5.   Copy the customer’s Display Name field from QBO to the client’s Display Name field in TG.
      6.   Wait until the next sync and TG should search QBO for the customer record using the Display Name field that you entered and use that record for the sync.
      1.  

   • ERROR: [6000] Business Validation Error: Make sure all your transactions have a GST/HST rate before you save.
     1. 1.   This error occurs if you are using a Non-US version of QBO.
        2.   Go to the company settings page and expand the QuickBooks Settings accordion. Under the QBO section, set the Country Version field to “Non-US”.
        3.   Expand the Tax Settings accordion and setup the tax rates to match your GST/HST rates. Also be sure to set the tax rate on your orders to the correct rates.
        4.   Wait until the next sync and check again if the order has synced.

   1. 1.  

   General  Issues: Clients are being duplicated. This issue can happen when a client you already had setup in QB has a Display Name format that did not match up with TG. (“fname lname (id)”). TG Is unable to find the customer in QB when syncing an order so it creates a new record. To fix this duplicated client, first start by merging in the newly created customer account in QB to the old customer record. Go to this client’s edit page, expand the QuickBooks accordion at the bottom of the page, and click the “Reset ID” button under the correct QB section. This will force TG to search QB for the customer next time there is an order to sync. To make sure TG finds the correct customer this time, copy the customer’s Display Name field from QB and paste it intto the client’s Display Name field in TG. The next time an order is synced, TG should find the customer record in QB using the Display Name field that you entered and use that to sync the order.  

   Videos QBO

   Reconcile ThermoGRID to QBO

   QuickBooks Transfer Log

   4. ERROR: [2500] Invalid Reference Id : Something you're trying to use has been made inactive. Check the fields with accounts, customers, items, vendors or employees.
      1. 1. 1.   This error occurs when one of the objects that the order In TG is trying to reference was disabled in QBO. The record is usually an account on one of the items, an item itself, or the customer record.
            2.   Please check through the customer, items, and accounts referenced on the order and re-activate the records in QBO. You can also delete the order in TG and recreate with non inactive records.
            3.   Wait until the next sync and check again if the order has synced.
            4.  
            5. 1.  
            6. 1.  
            7. 1.  
            8. 1.  
            9. 1.  
      1. 1. 1. </div>
      </div> </div> </div> </div></div> </div> </div> </div> </div>